MT-1050R Screw Feeder
MT-1050R Screw Feeder is designed and commonly used for M1.0 to M5.0 various types and length screws, such as standard screws, 1:1 short screws, self-tapping screws, with gasket screws, rivets, sheets, and small nuts. MT-1050R Screw Feeder is designed with a resistance to strong light interference. With display counting function LCD Panel for accurate counting.
Brand: INFINITE
Model: MT-1050R
Power Input: AC100V-240V (50/60HZ）
Power Output: DC15V 1.5A
Size (mm): 215(W) × 126(D) × 148(H)
Protecting Circuit: Stop or go backward when overloading
Weight (Kg): 3.5Kg
Speed: 50-80pcs/min
Capacity: M1.4*3 screw about 4,000 pcs
Accessories: Manual, AC adapter
Features:
- Widely applicable to M1.0-M5.0 screws of various types and lengths, such as standard screws, 1:1 Short screws, self-tapping screws, screws with washers, rivets, sheets, and small nuts, etc.
- Resistance to strong light interference
- Screw induction is not disturbed by strong light, and can still work normally under strong light, the adaptable wider environment
- The screw runs in the drum. Any screw that does not enter the track in the normal direction will fall into the drum and enter the next cycle without a material jam
- Display counting function accurately count, cycle, with LCD panel
- Feeding efficiency can be adjusted. The feeding and vibration are controlled independently, and the ideal feeding speed and vibration size can be set freely; The pause time of the quarter-division disc can be controlled independently, according to the needs of different screws and users set the length of time, suitable for a variety of tasks.
- Fault alarm function - when an abnormal situation occurs, such as material shortage, the screw machine will automatically activate the alarm function.
- Low noise and small size. It is compact, does not occupy space, and is convenient and practical.
- Turntable type material - rotary disc discharging, the stop position of each discharging is the same, which can better match the manipulator work.
- Overload protection - fully upgrade the control mainboard, and there is a material jam on the feeding motor and the indexing disk stepper motor when, the system automatically controls the motor to go backward for a certain period of time to avoid overloading and burning the motor or circuit board.
Please be aware that due to your computer monitor display the color may have some difference between the picture and the physical item
Please according to you to buy the dress fabric, select the corresponding fabric color chart
USD
EUR
GBP
CAD
CNY
SAR
SGD
NZD
ARS
INR
COP
AED
