Hanwha HM520 Modular Pick and Place Machine, 80,000 CPH, Original and Used SMT Machine
Hanwha HM520 Modular Pick and Place Machine is the ideal mounter for high volume/high-performance electronics, such as mobile phones and automotive applications. With component sizes shrinking and PCBs becoming more densely populated, placement repeatability and accuracy are more critical. The Hanwha HM520 series is ideally suited to this style application. The HM520 HS Module can handle the smaller chip components at a very high speed using the rotary heads to achieve that. The FS module is a multi-function module, capable of placing larger components up to 55mm square including shield can devices. HM Series machines are fully traceable from component tracking, PCB tracking by barcode, and fully Intelligent system. All are managed and controlled by the T-Solution Factory management software.
Key Advantages of HM Series:
- Reduction in Line Length with High Throughput
- Very Low Cost of Ownership
- Easy to use Software
- Ideal for high-volume/High Mix production
- Improved Axis and frame design over previous chip shooter models giving greater speed and higher precision
- Improved component range and now capable of placing 0.2mm x 0.1mm components at high speed
- Easy to use MMI and Off-Line Software with Touch Screen for operator convenience
- Fully Modular System depending on target cph needed and feeder requirement
- New Feeder Type for High-Speed Indexing and intelligent as standard
Hanwha HM520 modular Pick and Place Machine
Hanwha HM520 Chip Mounter
Patch speed: 80,000 CPH
size:890x2370x1930mm
weight:1605KG
Product description: Hanwha HM520 modular pick and place machine, it's Hanwha's first modular chip mounter, 890MM in length.
Patch speed: 80,000 CPH,Spindle head, Size:890x2370x1930mm,weight:1605KG
Hanwha HM520 modular Pick and Place Machine, it's Hanwha's first modular chip mounter, 890MM length.
890MM length ultra-small chip mounter
80,000CPH(Rotary Head)
60,000 CPH (Piano Head)
LED products: 72,000 CPH (Rotary)
Automatic detection of pick and placing problem.
Automatically replenishing suction/mounting position and height deviation
Preventing LED defects caused by turning
PCB: Max (L) 750x (W) 580mm (optional)
Equipment size:2370x1440x890mmEquipment weight:1605KG
The Hanwha HM520 modular Pick and Place Machine is a high-speed Modular Chip Mounter equipped with Rotary Head.
03015Chip ~ 14mm can be basically corresponding, and through the application of high-speed.
High-precision electric feeders, improve the actual productivity and placement quality.
Hanwha HM520 Chip Mounter parameters Number of shafts: 10 shafts * 2 cantilevers Mounting Speed: 80000CPH (Rotary Head Conditions)Mounting accuracy: 1mElectrically Driven High Speed and High Accuracy
High Productivity
20 Spindle Head:
Design to small and light head So that can use Fix Camera to identify 20 Spindle one times.
Fix Camera High clear High Pixel:
Use a high clear(5M) camera, Can pick and place Mini LED chip, Mobile phone micro chip(0402,0603) in high speed.
HM Feeder(8mm):
New design 8mm HM feeder, successively shorted 24% pick and place time.
Optimized LED production:
By Adapting Rotary head, reached 74000CPH real production speed with a few HM feeders.
Enlarged Area Productivity:
Enlarged PCB production size(L750mm), Shrinked equipment length(W0.89M), Highly enlarged unit area's productivity.(40% more than Decan Series Pick and Place Machine).
Reduce Cycle time by sharing Badmark information:
Share bad mark information identified by first equipment with other equipment in the smt assembly line, Reduced cycle time by sharing these bad mark information.
High Reliability
Side View Camera, Prevent missing components:
Check nozzle status and components status during the production process, checking before placing the component on PCB and after placing component on PCB to prevent component miss placing problem. And check the component height in real-time and automatically correct component position on PCB to prevent bad component placing.
Automatic correct picking and placing position:
Use the COR data from the Calibration result to correct pick and place position to prevent placing mistakes.
Height Sensor:
Can pick Emboss components without teaching by using Height Sensor, Automatic correct placing position tolerance caused by curved PCB.
LED components invert checking function:
Checking component invert or not by Vision Camera to prevent bad component placing on PCB.
Please be aware that due to your computer monitor display the color may have some difference between the picture and the physical item
Please according to you to buy the dress fabric, select the corresponding fabric color chart
USD
EUR
GBP
CAD
CNY
SAR
SGD
NZD
ARS
INR
COP
AED
